SafeWizard Operating Instructions American Security Products Company
Last Revision 10/17/2008 Page 39 of 73 Document 4305199
Chapter 3-2-4
Access Control-
Penalty Lockout
The SafeWizard penalty lockout is a security feature built into the system to prevent an unauthorized person
from logging in with someone else’s key. This lets you program in how many times a wrong PIN can be
entered before a person is “Locked Out;” you can also designate the duration of the lock out.
3-2-4.1 Access Control Menu
1 Door Access
2 Daylight Savings
3 Holidays
4 Penalty Lockout
5 PIN Life
6 Entry Doors
7 Man Trap Doors
QUIT
From the Access Control Menu, select 4 for Penalty Lockout.
3-2-4.2 Penalty Lockout Screen
Penalty Lockout
Wrong Tries 4
Lockout Time (min) 05
QUIT To Continue
Wrong Tries: This setting specifies the amount of time a wrong pin
can be entered for a user; 4 is the default. The administrator can
make this any number between 0 and 99.
Lockout Time: This indicates the amount of time that will have to
pass after a lockout before the user can attempt again.
The settings displayed are the default.
To Next Page
Loading...