AMSEC SafeWizard - Set Date and Time

SafeWizard Operating Instructions American Security Products Company
Last Revision 10/17/2008 Page 41 of 73 Document 4305199
Chapter 3-3
Set Date and Time
3-3.1 Administration Menu
1 Set Up Users
2 Set Access Control
3 Set Date and Time
4 Set up Factory
5 Change your PIN
QUIT
From the Administration Menu, select 3 for Set Date and Time.
3-3.2 Set Date & Time Menu
Set Date & Time
Enter in 24Hr Format
Time: 10:01
Date: 01/02/2005
Time Format AM/PM
Day of Week SUN
QUIT
This screen allows you to modify the date and time in the SafeWizard
by using the UP/DOWN arrow keys on the keypad. Use the number
keys to modify the number fields, and use the NEXT and BACK keys
to modify the text fields. After completing this step, pressing QUIT will
take you back to the Administration Menu.