AMSEC SafeWizard - Auditing Specific Event Types; Selecting Event Type for Audit

SafeWizard Operating Instructions American Security Products Company
Last Revision 10/17/2008 Page 54 of 73 Document 4305199
Chapter 4-4
Audit by Event
4-4.1 Audit By Event Screen
Select Event
To Audit
Event 59
DOOR LEFT OPEN
NEXT-BACK Event
ENTER to Select
Audit by “Event” will filter the records to a specific type of action. For
example, this type of audit is used if you would like to see a report for
every time the SafeWizard had a door left open. The report you will
receive will only list this event and show you the audit record, date
and time that these events happened.
4-4.2 Select Date Range Screen
Select Date Range
To Audit
01/01/2001
to
06/15/03
ENTER to Proceed
Using the arrows and number pad on the SafeWizard, enter the date
range that you would like to audit. The “To” field will be automatically
populated with today’s date, but you can change that to any date that
you choose.
4-4.3 Audit to What Device Screen
Audit To What Device
1 Display
2 Printer Port (Prtr)
3 Serial Port (PC)
4 Palmtop Port (IR)
QUIT
1 Display used when only a few audit records are only needed.
2 Printer Port used when an audit report can be printed to a local
printer. This requires a parallel printer cable connected tp the parallel
port on the side of the SafeWizard power supply. There is a choice to
print to a Laser or Bubble Jet printer.
3 Serial Port located on the front underside of the SafeWizard
Controller is available when the optional “Audit Kit”. The software
must be installed from the CD and the provided serial cable
connected from the SafeWizard Controller Key Pad to a computer.
4 Palmtop Port is used with a PDA with Windows CE operating
program. See instructions on page ##.
4-4.4 Audit Record Screen
Record No. 0090
00:01 06/15/2003
User No. 01
BOB
Event No. 03
LOGIN SUCCESS
NEXT-BACK-QUIT
Using the NEXT and BACK arrows on the number pad on the
SafeWizard you can scroll through the audit record history for this
user. By pressing QUIT on the key pad you will go back to the “Audit
to What Device” menu.