Start up Guide for Axpert-VT240S Series AC Drive
21
Speed position detection error
Reducing carrier frequency
Overload error (50% or more)
Speed deviation error
AI2 current input 3mA or less
AI1 current input 3mA or less
Pump control lower limit
Pump control upper limit
Field network option
communication error
Sequence output (D04-6)
MP08
MP07
MP06
MP05
MP01
MP02
MP03
MP04
Sequence output (D04-7)
Disconnection between
parallel PCB detection
CPU WDT signal detection
Fuse blown detection
Overheat detection
Ground fault detection
Over current detection
Power module error
Over voltage detection
* The top line is the latch signal
for the bottom line.
Hardware detection fault status
PSO1 (Pump 1)
PSO2 (Pump 2)
PSO3 (Pump 3)
PSO4 (Pump 4)
PSO5 (Pump 5)
PSO7 (Pump 7)
PSO8 (Pump 8)
Pump operation status monitor (D07-0)
PSO6 (Pump 6)
To Next Page
Loading...