EasyManua.ls Logo

Amway eSpringPro - Maintenance Procedures; Water Filter Replacement Procedure

Amway eSpringPro
29 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WARNING : RISK OF ELECTRICAL SHOCK. MAKE SURE THAT THE UNIT IS NOT
PLUGGED INTO AN ELECTRICAL OUTLET TO PREVENT SHOCKS.
FILTER REPLACEMENT
Refer to the exploded view of the eSpring™ Pro Water Purier for assistance with part names.
MAINTENANCE
IMPORTANT: Use the handle as necessary when moving, opening, or closing
the lter vessel.
Unplug the Power Adapter from the wall outlet to prevent electric shocks while the lter is being
replaced.
Remove the cover to access the lter vessel by
pulling up and away from the base unit.
Turn o the water supply to Water Purier, using the appropriate of the following two methods:
a. If using the diverter, turn o the kitchen tap and switch the diverter handle to the treated
position to drain water. (Refer to Operation of the Diverter)
b. If using the Auxiliary Faucet, turn o the cold-water supply using the shut-o valve. Turn on
Faucet and leave open.
1
3
2
To replace the lter, you will need a replacement lter kit. This
kit can be ordered on the web site at www.xxxxxx.xxxx/xxx, or
ordered through Customer Service: xxxxxxxxxx, call x-xxx-xxxx,
Days/Hours
19

Related product manuals