33
7.1 Operang mode
7. OPERATING THE SMARTMATRIX² FROM THE RCS²
7.1
Before you start seng up your SmartMatriX² for the rst me, take some me to think about how you will
be using it. The SmartMatriX² oers one operang mode, which results in a versale video producon tool
for live event staging and xed installaon applicaons.
NOTE: We recommend reseng the device to its default values every me you set up your shows or events.
Go to the setup secon to start to set up
your unit.
A Setup assistant is available to help you
to correctly adjust all basic setups of
your unit.
7.2 Setup
The device can work in Matrix mode only.
This mode turns your SmartMatriX² into a true 10 x 2 scaled matrix, while preserving seamless switching
capabilies. Program 1 and Program 2 outputs can be set to dierent resoluons and rates. Switching between
any of the inputs can be done with the various eects (Cut, Fade, Slides…) and synchronized on both outputs.
Quick Frame
Layer B
Layer A
Frame
Background
Foreground
Logo
To Next Page
Loading...
Need help?
General
