ANFIM Luna - Grinding operation

15
Luna/Alba | EN
Grinding espresso beans
1. Select the desired recipe or the Manual grinding option by tapping the respective
display on the touchscreen.
The selected recipe or the Manual grinding option is highlighted in color.
2. Push the portafilter all the way in between the portafilter intake (14) and the
portafilter support (12).
The inserted portafilter actuates the trigger switch (13) and the grinder starts the
grinding process.
In the case of Grinding according to recipe, the grinding process stops automat-
ically after the grinding time has elapsed; in the case of Manual grinding, you
stop the grinding process by manually removing the portafilter.
3. Remove the portafilter from the portafilter intake after the grinding process has
been completed or after the desired amount of ground coffee has been obtained
(Manual grinding).
Suspending grinding (break function)
The break function automatically suspends grinding when you remove the portafilter
from the portafilter intake(14) and continues grinding when you re-insert the porta-
filter in the portafilter intake before the pre-set break time has elapsed.
The pre-set break time is 2seconds.
You can change the break time in the main menu (see “Opening and using
the main menu” section).
Changing the type of espresso beans
1. Open the bean hopper (1) by pulling out the slider (19).
2. Use the Manual grinding function to grind the espresso beans that remain in the
grinding mechanism until the grinder runs idle.
3. Undo the securing screwfor the bean hopper.
4. Rotate the bean hopper counterclockwise to loosen it from the grinder, and
remove it from the grinder by lifting it upwards.
5. Remove the leftover espresso beans from the hopper.
6. Remove any excess beans from the hopper intake.
7. Re-insert the bean hopper (see “Inserting the hopper” section).
8. Pour the new espresso beans into the bean hopper.
9. Open the bean hopper by pushing in the slider.
10. Grind 2–3 shots to remove any residue of the old espresso beans, to warm up the
machine and to avoid any fluctuations in dispensing the beans.