Page 16 of 28
7 Wi-Fi Pairing
Note: The Smart Home Pedestal Fan and TuyaSmart App only supports a 2.4GHz Wi-
Fi network. It will not work on a 5GHz network.
After downloading, installing the TuyaSmart App to your smart phone and registering, you
need to pair your Smart Fan and Smart Phone to operate the fan through your phone.
1. Plug your fan into a power point and switch on.
2. The Number Display and Icons on the fan control panel will illuminate for a second
and will then turn off.
3. If this is your first time pairing these devices, after approximately 5 seconds, the Wi-Fi
indicator light will illuminate and will blink rapidly (approx. 2 times per second).
4. Open your TuyaSmart App and log in.
5. On the Welcome page, press the button “Add Device”
6. Select the “Home Appliance” menu in the left column. Note: there may be more than
one “Home Appliance” menu so you will need to look through them all until you see
“Fan”.
7. Press the “Fan” icon and this will then ask you to confirm that the Wi-Fi indicator light
is rapidly blinking in the Fan Control Panel. Press the button to confirm.
8. If you haven’t already logged into your Wi-Fi network, you can do that on the next
page, then press “OK”.
9. You will now see a progress % circle while connecting.
10. Once connected, it will state “Device added successfully”.
11. You can change the name of your fan if you desire. To do this, press the small pencil
icon next to the Fan image then change the name. The default name is “Smart Fan”.
For example, you can rename it “Living Room Fan” then press save.
Refer to “Using the Smart Phone App” section in this instruction manual for more
information.
12. On this same page, you can select the room in which the Fan will be used then press
the “Completed” button.
You are now connected and ready to operate the fan through your smart phone.
To learn more about what the TuyaSmart App can do, or if you have any questions,
please visit TuyaSmart website
https://smartapp.tuya.com/tuyasmart/faq
To Next Page
