Page 7 of 28
3 Assembly
3.1 Base and Stand
Your Fan has been boxed unassembled to minimise packaging waste. Each part is
designed to fit together and be disassembled easily for cleaning or storage.
• First, with the aid of a Philips Head screwdriver, unscrew the Screw and Washer
from the bottom of the stand post. (Anticlockwise).
• Place the base flat on the floor and fit the post into the recess in the top of the base.
• Whilst holding the post and base together, tip up so that the underneath of the base
is accessible.
• Place the Screw and Washer through the hole and with the aid of a Philips Head
screwdriver, tighten the Screw and Washer. (Clockwise).
To Next Page
Loading...
