Page 12 of 24
During Charging, the indicator light bars on the handle will illuminate in order
of charge state and will blink indicating the battery is charging.
All the bars will be OFF when fully charged.
When the battery is fully charged, switch off and unplug the battery charger
from the power supply.
When fully charged, the Vacuum Cleaner is ready for use.
NOTE: NEVER BLOCK ANY VENTS OR OPENINGS.
6 Using the Vacuum Cleaner
6.1 On / Off
To use the Vacuum Cleaner, assemble the unit as previously instructed and
ensure the battery is fully charged.
To switch on, press the top button on the handle once. The vacuum cleaner
will start in the default power mode.
The fully charged battery will provide approximately 30 - 35 minutes of power
for continuous use of the vacuum cleaner.
Press the same button again to turn Off.
Note: The vacuum cleaner cannot be started when charging.
To Next Page
Loading...
Need help?
General
