Page 11 of 24
5.7 Charging
Note: Charge the Vacuum Cleaner for at least 5 hours prior to use.
Only use the Battery Charger which was supplied with this appliance.
Insert the battery into the back of the vacuum Cleaner body and push all the
way in until it locks in place.
Note: The Battery can only be inserted in one direction as shown
To Remove the battery, press the two release buttons located on the side of
the battery, and at the same time, pull the battery straight out.
Take the battery charger unit and unravel the cord.
Take the small plug on the end of the battery charger cable and plug it into the
charging port on the side of the vacuum cleaner body.
Plug the Battery Charger into the power point and switch on.
To Next Page
Loading...
Need help?
General
