Anritsu MG369 C Series User Manual

Programming with GPIB Commands 2-5 CW Frequency Commands
MG369xC GPIB PM PN: 10370-10374 Rev. F 2-13
Figure 2-2 shows an example of a CW frequency command string.
Figure 2-2. Example of a CW Frequency Command String
CF1
Places the MG369xC at the preset (or previously set) CW F1 frequency and opens the
F1 parameter for data entry.
Closes the F1 parameter. Places the MG369xC at the preset (or previously set) CW F6 frequency
and opens the F6 parameter for data entry. Sets the F6 frequency to 7 GHz.
Closes the F6 parameter. Places the MG369xC at the preset (or previously set)
CW F7 parameter and opens the F7 parameter for data entry.
CF6 7 GH SQF

Anritsu MG369 C Series Specifications

General

Brand	Anritsu
Model	MG369 C Series
Category	Portable Generator
Language	English