Anritsu Site Master S113B - Page 36

SYS Displays the System menu softkey selections.
q
OPTIONS — Displays a second level of functions.
q
CLOCK — Displays a second level of functions.
q
SELF TEST — Start an instrument self test.
q
STATUS — Displays instrument status.
OPTIONS
q
UNITS — Select the unit of measurement (English or metric).
q
PRINTER — Displays a menu of supported printers. Use the Up/Down arrow
key and
ENTER key to make the selection.
q
FIXED CW — Toggles the fixed CW function ON or OFF. When ON, F1 is
set equal to F2 and a CW frequency is fixed at the selected value. When OFF,
a narrow band of frequencies centered on the selected frequency is generated.
q
CHANGE DATE FORMAT — Toggles the date format between MM/DD/YY,
DD/MM/YY, and YY/MM/DD.
CLOCK
q
HOUR — Enter the hour (0-23) using the Up/Down arrow key or the keypad.
Press
ENTER when data entry is complete or ESCAPE to restore the previous
value.
q
MINUTE — Enter the minute (0-59) using the Up/Down arrow key or the
keypad. Press
ENTER when data entry is complete or ESCAPE to restore the
previous value.
q
MONTH — Enter the month (1-12) using the Up/Down arrow key or the key-
pad. Press
ENTER when data entry is complete or ESCAPE to restore the pre-
vious value.
q
DAY — Enter the day using the Up/Down arrow key or the keypad. Press
ENTER when data entry is complete or ESCAPE to restore the previous
value.
q
YEAR — Enter the year (1997-2036) using the Up/Down arrow key or the
keypad. Press
ENTER when data entry is complete or ESCAPE to restore the
previous value.
q
BACK — Returns to the top-level SYS menu.
3-17
Chapter 3 Functions and Operations