Anser U2 SMART - Cartridge Insert & Remove

15
2
Anti-shock plate
should be installed
according to the
direction of the
moving object.
3
Keep a working area of
at least 40 cm to
facilitate on-site
personnel to operate
and maintain the
equipment.
3.2 Cartridge Insert & Remove
Inserting the Cartridge
１
1. Open the dust cover on the top of the printer.
2. Open the latch on the rear of the printer.
２
Insert the ink cartridge into the printer at a 15 degree angle and then
press it down.
３
1. Close the latch on the rear of the printer.
2. Close the dust cover on the top of the printer.