Anser U2 SMART - Editor Settings; Global Shift Table; Global String Table; Pre-Zero Format

32
4.4 Editor Settings
The “Editor Settings” main menu can be used for “Global shift table”, “Global string table”,
“Pre-zero format” and “Custom year” to improve the efficiency of message editing.
Functions are described below:
4.4.1 Global Shift Table
Shift objects within a message can be edit by going through “Main menu”  Global
Shift Table” to the editing page.
4.4.2 Global String Table
String objects within a message can be edit by going through “Main menu”  “Global
String Table” to the editing page.
4.4.3 Pre-Zero Format
When setting system printing dynamic values, the rendering of meaningless characters
before numerical values, there are three items can be set: Time, date and counter as
show in the following table:
Time
（Actual Time am 01:08:06）
Date
（Actual date 2018/01/05）
Counter
（0~999，present value
８）
Fill 0
01:08:06
2018/01/05
008
Align Left
1-:8-:6-
2018/1-/5-
8--
Align Right
-1:-8:-6
2018/-1/-5
--8
Compact
1:8:6
2018/1/5
8
4.4.4 Custom Year
Custom year have two features, one to set custom year and one to set roll over date
time.
Custom Year: If this value is set as 107, the printing year will be change to 0107.
Rollover Hour: User-defined rollover date time setting, for example: Rollover time set
as 23:50, current date time as 2018/01/05 23:52, then the system will automatically
go forward one day printing 2018/01/06 23:52.