Need help?Do you have a question about the Ansul AUTOPULSE IQ-636X and is the answer not in the manual?
General| Brand | Ansul |
|---|---|
| Model | AUTOPULSE IQ-636X |
| Category | Control Panel |
| Language | English |
Alerts readers to potential programming errors, runtime issues, or equipment damage.
Explains the formatting conventions used throughout the manual.
Lists other documents referenced in this manual for additional information.
Provides a general description of the IQ-636X Fire Alarm Control Panel.
Lists the key features and capabilities of the IQ-636X system.
Explains the function and meaning of the eight system status LEDs on the panel.
Describes the five control keys and their functions on the panel.
Details the keys on the programming keypad and their uses.
Describes the system's state when no alarms or troubles exist.
Details how the panel indicates and responds to a fire alarm condition.
Explains how the system indicates and responds to electrical faults or issues.
Describes panel behavior when a security point is activated.
Explains how the panel handles supervisory signals from monitor modules.
Details how the panel indicates and responds to pre-alarm conditions.
Describes how the panel indicates when devices or points are disabled.
Covers points that do not trigger alarms but may activate other functions.
Explains monitoring of equipment and potential trouble conditions.
Describes issues with NACs, Panel Circuits, and Control/Relay Modules.
Details the functions of Auto Silence, Alarm Verification, and Silence Inhibit timers.
Explains operation related to waterflow detection circuits.
Describes supervised communication methods for addressable devices.
Explains the purpose and capabilities of the Read Status function.
Provides steps to access the Read Status feature on the control panel.
Details how to view and print various system status information.
Provides instructions to view status for detectors, zones, and system configurations.
Details how to view status information for individual detectors.
Explains how to view status for control/relay and monitor modules.
Details how to view status for Notification Appliance Circuits (NACs) and Panel Circuits.
Explains how to view status for software-defined zones.
Details how to view status for special function zones.
Explains how to view status for releasing zones used in suppression systems.
Details how to view global system settings and parameters.
Explains how to view the configuration of ACS annunciators.
Details how to check the status and voltage of the system batteries.
Explains how to view historical event and alarm data from the panel.
Details how to view specific alarm events from the history buffer.
Provides instructions for printing point data, event history, and alarm history.
Explains how to access and print previous history buffer data.
Describes the setup and operation of Releasing Zones for suppression systems.
Covers setting and viewing time, date, and holiday scheduling for system operations.
Explains how to select audio/visual signaling codes for outputs.
Details Presignal and PAS features for delayed or supervised alarm responses.
Describes the three operating modes for connecting to a terminal or computer.
Explains functions, passwords, and requirements for Local Terminal Mode.
Details functions, passwords, and requirements for Local Monitor Mode.
Describes functions, passwords, and requirements for Remote Terminal Mode.
Shows how to perform Read Status functions using a CRT-2 terminal.
Details how to read status for individual points using the CRT-2.
Shows how to display devices currently in alarm or trouble via CRT-2.
Explains how to display the status of all programmed points on the CRT-2.
Details how to step through the history buffer on the CRT-2.
Shows how to send the entire history buffer to the CRT-2.
Details how to step through the alarm history buffer on the CRT-2.
Shows how to send the entire alarm history buffer to the CRT-2.
Shows how to perform Alter Status functions using a CRT-2 terminal.
Guides users on how to access the Alter Status options menu.
Explains how to enable or disable system devices via CRT-2.
Details how to adjust alarm and pre-alarm sensitivity levels for detectors.
Shows how to clear the verification counter for detectors.
Explains how to clear the panel's history buffer.
Guides users on setting pre-alarm response levels to Alert or Action.
Lists common device troubles, their descriptions, and recommended actions.
Lists common system troubles, their descriptions, and recommended actions.
To Next Page
