Appendix C: Remote Terminal Access Using the CRT-2 for Read Status
74 IQ-636X Operations Manual P/N 52181:A 04/28/2005
Send the Alarm History Buffer to the CRT-2
From the “Read Status” menu select option 7 - History-All. This option sends the entire History buffer
to the CRT-2, from most recent event to oldest event:
Press
7W
************************** ALARM HISTORY START *************************************
ALARM: MAN_RELEASE MODULE ADDR 1M065 10:21A 050501 1M065
ALARM: MAN_RELEASE MODULE ADDR 1M065 10:19A 050501 1M065
ALARM: MAN_RELEASE MODULE ADDR 1M065 03:20P 050401 1M065
ALARM: SMOKE (ION) DETECTOR ADDR 1D129 03:20P 050401 1D129
To Next Page
Loading...
Need help?
General
