System Components
UL EX-4510 2-1-12 Page 1-3.1
REV. 4
Description
The ANSUL AUTOMAN
® II-C Releasing Device consists of
a metal enclosure which contains a spring-loaded puncture
pin release mechanism, an actuation cartridge, electrical
circuitry, and an input/output terminal strip for making elec-
trical connections. The ANSUL AUTOMAN II-C releasing
device provides automatic pneumatic actuation of the
INERGEN® System. When wired to an AUTOPULSE®
Control System, it will provide supervised electric detection
and release. It also provides manual actuation using the
strike button on the release enclosure and with the optional
remote manual cable pull station. When an AUTOPULSE
Control System is used, manual actuation is accomplished
using an electric manual pull station.
ANSUL AUTOMAN® II-C Releasing Device
RELEASE
MECHANISM
STRIKE
BUTTON
TERMINAL
BOARD
NAMEPLATE
000442
Component Approvals
ANSUL AUTOMAN II-C Releasing UL Listed
Device (EX-4510);
ANSUL AUTOMAN II-C Releasing Listed for use
Device (Explosion-Proof) with FM
Approved
systems
Shipping Assembly
Part No. Description
17728 ANSUL AUTOMAN II-C Releasing Device, 24 VDC
31492 ANSUL AUTOMAN II-C Releasing Device, Explosion-Proof, 24 VDC
32525* ANSUL AUTOMAN II-C Releasing Device, Explosion-Proof, 120 VAC
32526* ANSUL AUTOMAN II-C Releasing Device, Explosion-Proof, 240 VAC
5373 LT-30-R Nitrogen Cartridge
*Not FMRC Approved
ANSUL
®
Copyright © 2012 Tyco Fire Products LP.
All rights reserved.
Form No. F-9495-04
One Stanton Street +1-715-735-7411
Marinette, WI 54143-2542 www.ansul.com
To Next Page
Loading...