Ansul INERGEN 150-BAR - Cylinder Bracketing

System Components
UL EX-4510 2-1-12 Page 1-17
REV. 9
Description
The cylinder bracketing is designed to rigidly support the
installed INERGEN
® agent cylinders. The bracketing com-
ponents are constructed of heavy structural steel. Bracket
assemblies are available in modules for two to six cylinders
and can also be connected together for any combination
over six. Bracketing can be assembled to support single
row, double row or back-to-back rows of cylinders.
Bracketing components are painted with a red enamel coat-
ing. Uprights and back frame assemblies can be bolted or
welded together, which ever makes the installation more
convenient.
Cylinder Bracketing
Component Material Approvals
Bracketing Steel UL Listed (EX-4510);
Listed for use with
FM Approved systems
Shipping Assembly
Part No. Description
845120 200 ft
3
(5.7 m
3
) cylinder strap (single cylinder)
845244 200 ft
3
(5.7 m
3
) cylinder channel with nuts and bolts (single cylinder)
845121 250 ft
3
(7.1 m
3
) cylinder strap (single cylinder)
845261 250 ft
3
(7.1 m
3
) cylinder channel with nuts and bolts (single cylinder)
845122 350 ft
3
(9.9 m
3
), 425 ft
3
(12.0 m
3
), 435 ft
3
(12.3 m
3
) cylinder strap (single cylinder)
845245 350 ft
3
(9.9 m
3
), 425 ft
3
(12.0 m
3
), 435 ft
3
(12.3 m
3
) cylinder channel
with nuts and bolts (single cylinder)
879638 Back frame assembly (2 cylinder)
879639 Back frame assembly (3 cylinder)
879640 Back frame assembly (4 cylinder)
879641 Back frame assembly (5 cylinder)
879642 Back frame assembly (6 cylinder)
873257 Upright, for 200, 250, 350, and 435 ft
3
(12.3 m
3
) cylinders (used either for right side, left side
or center (center upright required when connecting seven or more cylinders in a row))
426592 Upright, for 425 ft
3
(12.0 m
3
) cylinder (used either for right side, left side, or center
(center upright required when connecting seven or more cylinders in a row))
873553 Single row or back-to-back row bracket foot (left side)
873554 Single row or back-to-back row bracket foot (right side)
873555 Double row bracket foot (left side)
873556 Double row bracket foot (right side)
418508 Center upright foot
879413 Connector (required to hook together back frames for seven or more cylinders)
873250 10.5 in. (26.7 cm) carriage bolt with nut (for single row 200 ft
3
(5.7 m
3
) cylinders)
873251 11 in (27.9 cm) carriage bolt with nut (for single row 250 ft
3
(7.1 m
3
) cylinders)
873252 12.5 in. (31.8 cm) carriage bolt with nut (for single row 350 ft
3
(9.9 m
3
) and
425 ft
3
(12.0 m
3
) cylinders)
418502 13 in. (33.0 cm) carriage bolt with nut (for single row 435 ft
3
(12.3 m
3
) cylinders)
873253 21 in. (53.3 cm) carriage bolt with nut (for double row 200 ft
3
(5.7 m
3
) cylinders)
873254 22 in. (55.9 cm) carriage bolt with nut (for double row 250 ft
3
(7.1 m
3
) cylinders)
873255 26 in. (66 cm) carriage bolt with nut (for double row 350 ft
3
(9.9 m
3
) and
425 ft
3
(12.0 m
3
) cylinders)
418503 27 in. (68.6 cm) carriage bolt with nut (for double row 435 ft
3
(12.3 m
3
) cylinders)
873091 Cylinder clamp (2 cylinders)
873092 Cylinder clamp (3 cylinders)
871683 Weigh rail support – single row
871682 Weigh rail support – double row
871684 Weigh rail support – back-to-back rows
423027 Weigh rail support back-to-back double row
ANSUL
®