System Components
UL EX-4510 2-1-12 Page 1-14.1
REV. 5
Description
The Stainless Steel Actuation Hose is used to connect the
actuation line flared tees between each agent tank. The
hose has the same thread, 7/16-20, as the flared tees. The
actuation hose allows flexibility between the rigid actuation
piping and the tank valve.
Additional actuation fittings are available:
Part No. Description
_______ _________
831810 Male Elbow (7/16-20 x 1/4 in. NPT)
831811 Male Tee (7/16-20 x 7/16-20 x 1/4 in. NPT)
832338 Male Straight Connector (7/16-20 x 1/4 in. NPT)
Stainless Steel Actuation Hose
Shipping Assembly
Part No. Description
831809 16 in. (40.6 cm) Stainless
Steel Hose
832335 20 in. (50.8 cm) Stainless
Steel Hose
832336 24 in. (60.9 cm) Stainless
Steel Hose
Component Material Thread Size Approvals
Stainless Steel Hose Stainless Steel Female 7/16-20 UL Listed (EX-4510); Listed for use
(Both ends) with FM Approved systems
24 IN.
(61 cm)
7/16-20
000433
7/16-20
ANSUL
®
Copyright © 2012 Tyco Fire Products LP.
All rights reserved.
Form No. F-9496-05
One Stanton Street +1-715-735-7411
Marinette, WI 54143-2542 www.ansul.com
To Next Page
Loading...