EasyManua.ls Logo

Ansul INERGEN 150-BAR - CV-98 Valve;Cylinder Shipping Assembly BIS Approvals

Ansul INERGEN 150-BAR
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
System Components
UL EX-4510 2-1-12 Page 1-2
REV. 1
Description
The cylinder is factory filled with INERGEN agent. A single
cylinder may be used or multiple cylinders can be manifold-
ed together to obtain the required quantity of agent for total
flooding. The cylinder valve can be actuated electrically,
pneumatically, and/or manually with approved valve actua-
tion components. All valves are equipped with an anti-recoil
feature.
The cylinders are shipped with a maintenance record card
and protective shipping cap attached to the threaded neck
of each cylinder. This cap entirely encloses and protects
the valve while in shipment.
The equivalent length of the valve is equal to 20 ft (6.1 m)
of 1/2 in. Sch. 40 pipe.
CV-98 Valve / Cylinder Shipping Assembly –
BIS Approvals
Shipping Nominal Cylinder Actual INERGEN Approximate Dimension Dimension
Assembly Size Agent Quantity Weight A B
Part No. ft
3
(m
3
)ft
3
m
3
lb (kg) in. (mm) in. (mm)
438806 435 (12.3) 439 (12.4) 260 (117.9)
66.9 (1700) 11.0 (279)
ANSUL®
Component Material Approvals
Cylinder Steel, Red IS 7285
Epoxy CR
Paint
Valve Brass
Safety Relief Valve Brass
Valve/Cylinder UL Listed (EX-4510);
Assembly Listed for use with
FM Approved
systems
Shipping Cap Steel, Red
Epoxy CR
Paint
PRESSURE
GAUGE
SAFETY
RELIEF
VALVE
VALVE
HEIGHT TO OUTLET
CENTER
002252
002251
RECORD
TAG
PRESSURE
GAUGE
CYLINDER
SHIPPING CAP
VALVE SHIPPING CAP
B
A
CV-98 INERGEN Valve
The CV-98 valve has a ten (10) year warranty. The valve
requires no internal maintenance. The valve is sealed
closed and must not be disassembled. If there is ever a
malfunction of the CV-98 valve, the complete valve must be
sent back to Ansul for warranty replacement. If the exter-
nal seal is broken, the warranty is voided.
Note: Use Flexible Discharge Bend (Part No. 427082) when
attaching valve to supply pipe or manifold.
3 1/2 IN.
(89 mm)
REFERENCE
Copyright © 2012 Tyco Fire Products LP.
All rights reserved.
Form No. F-2011150-01
One Stanton Street +1-715-735-7411
Marinette, WI 54143-2542 www.ansul.com

Related product manuals