System Components
UL EX-4510 2-1-12 Page 1-6
REV. 3
Description
The 1/16 in. diameter cable is used to attach remote manu-
al pull boxes to cylinder valves, pull equalizers and control
boxes. The cable is constructed of stranded, stainless steel
wire. The cable is available in lengths of 50, 100, and 150 ft
(15.2, 30.5, and 45.7 m). The cable assemblies include a
brass swaged end fitting for attaching to the remote pull
box.
Cable with Swaged End Fitting
Component Material Approvals
Cable Assembly Cable: UL Listed (EX-4510);
Stainless Listed for use with
Steel FM Approved
Swaged
systems
Fitting:
Brass
Shipping Assembly
Part No. Description
842104 50 ft (15.2 m) 1/16 in. (0.16 cm) cable with swaged end fitting
842109 100 ft (30.5 m) 1/16 in. (0.16 cm) cable with swaged end fitting
842113 150 ft (45.7 m) 1/16 in. (0.16 cm) cable with swaged end fitting
Note: The strength of the end fitting exceeds the breaking point of the cable.
HANDLE
CABLE
END
(BRASS)
COUPLING
SLOT IN COUPLING
FOR INSTALLATION
OF CABLE END
FITTING
STAINLESS STEEL CABLE WITH SWAGED
CABLE END FOR PULL BOX, CABLE END
HAVING RED PAINT MARK
000689
ANSUL
®
Copyright © 2012 Tyco Fire Products LP.
All rights reserved.
Form No. F-9321-04
One Stanton Street +1-715-735-7411
Marinette, WI 54143-2542 www.ansul.com
To Next Page
Loading...