Ansul INERGEN 150-BAR - CV-98 Valve;Cylinder Shipping Assembly

System Components
UL EX-4510 2-1-12 Page 1-1.1
REV. 5
Description
The cylinder is factory filled with INERGEN
® agent. A single
cylinder may be used or multiple cylinders can be manifold-
ed together to obtain the required quantity of agent for total
flooding. The cylinder valve can be actuated electrically,
pneumatically, and/or manually with approved valve actua-
tion components. All valves are equipped with an anti-recoil
feature.
The cylinders are shipped with a maintenance record card
and protective shipping cap attached to the threaded neck
of each cylinder. This cap entirely encloses and protects
the valve while in shipment.
The equivalent length of the valve is equal to 20 ft (6.1 m)
of 1/2 in. Sch. 40 pipe.
CV-98 Valve / Cylinder Shipping Assembly
Component Material Approvals
Cylinder Steel Meets DOT 3AA2300;
Meets TC3AM176 or
TC3AAM176
Valve Brass
Safety Relief Valve Brass
Valve/Cylinder UL Listed (EX-4510);
Assembly Listed for use with
FM Approved systems
Shipping Cap Steel
Shipping Nominal Cylinder Actual INERGEN Approximate Dimension Dimension
Assembly Size Agent Quantity Weight A B
Part No. ft
3
(m
3
)ft
3
m
3
lb (kg) in. (mm) in. (mm)
Shipping Assemblies – Red Standard Paint
426147 200 (5.7) 205 (5.8) 128 (58) 52.7 (1339) 8.5 (216)
426148 250 (7.1) 266 (7.5) 169 (77) 57.7 (1466) 9.3 (236)
426149 350 (9.9) 355 (10.1) 217 (98) 59.7 (1516) 10.7 (272)
426620 (LC) 350 (9.9) 355 (10.1) 217 (98) 60.2 (1529) 10.5 (268)
428646 435 (12.3) 439 (12.4) 260 (117.9) 66.9 (1699) 11.0 (279)
426150* (LC) 435 (12.3) 439 (12.4) 260 (117.9) 66.9 (1699) 11.0 (279)
Shipping Assemblies – Red Corrosion Resistant Paint
426256 200 (5.7) 205 (5.8) 128 (58) 52.7 (1339) 8.5 (216)
426257 250 (7.1) 266 (7.5) 169 (77) 57.7 (1466) 9.3 (236)
426258 350 (9.9) 355 (10.1) 217 (98) 59.7 (1516) 10.7 (272)
426621
(LC)
350 (9.9) 355 (10.1) 217 (98) 60.2 (1529) 10.5 (268)
426259
(LC)
435 (12.3) 439 (12.4) 260 (117.9)
66.9 (1699) 11.0 (279)
ANSUL
®
* Note 1: For Shanghai version, order Part No. 430935.
Note 2: For Shanghai version requiring 172-bar cylinder (rating on cylinder not actual pressure in cylinder), order Part No. 437299.