Ansul INERGEN 150-BAR - Page 34

Manual Pull Box Break Glass Type “A”
SPRING FORCES
HANDLE
OUT INTO
OPERATING
POSITION
WHEN GLASS
IS BROKEN
MOISTURE
PROOF
JOINT
PULL
HANDLE
GLASS
FRONT
3/8 IN. PIPE
TO ENCLOSE
PULL CABLE
1/16 IN. STAINLESS
STEEL PULL CABLE
CAST
BRASS
HINGED
COVER
(PAINTED
RED)
CAST BRASS
BODY
(PAINTED RED)
STOWAGE SPACE
FOR SPARE
DISCS AND
WASHERS
2 13/16 IN.
(7.1 cm)
PROTECTED HAZARD
ENGRAVED IN
NAMEPLATE (SPECIFY)
4 7/16 IN.
(11.2 cm)
3 1/4 IN.
(8.2 cm)
4 – 3/16 IN.
MOUNTING
HOLES
4 7/8 IN.
(12.3 cm)
3 IN.
(7.6 cm)
IN CASE OF FIRE
BREAK GLASS AND
PULL HANDLE HARD
UNTIL RED PAINT
MARK ON CABLE
SHOWS
BRASS HAMMER
AND CHAIN
SECURED
TO BOX
Copyright © 2012 Tyco Fire Products LP.
All rights reserved.
Form No. F-9318-04
One Stanton Street +1-715-735-7411
Marinette, WI 54143-2542 www.ansul.com