Antelope Audio Zen Quadro Synergy Core User Manual
Page 68
Recording and Monitoring Edge Solo
Edge Solo is a single-membrane condenser microphone. This means the microphone will
occupy one physical mic preamp input and one virtual ‘MIC EMU’ output.
Edge Solo mic emulations work on a single input audio channel. Recording and monitoring
both ‘dry’ and ‘mic emulation’ audio means dealing with two mono tracks.
• Route the “PREAMP” channel for Edge Note to your Desired outputs to monitor “dry”
audio. Route to ‘USB 1 I/O’ or ‘USB 2 I/O’ to record from the corresponding input in
your DAW.
• Route the “EMU MIC” channel for Edge Note (same number as the “PREAMP” input”) to
your desired outputs to monitor “mic emulation” audio. Route to ‘USB 1 I/O’ or ‘USB 2
I/O’ to record from the corresponding input in your DAW or mobile device.
• Route “PREAMP” and “EMU MIC” channels to your desired outputs and ‘USB 1 I/O’ or
‘USB 2 I/O’ inputs to monitor and record both “dry” and “mic emulation” audio.
• For more information about Edge Solo, visit its product page.
For more information about Edge Solo, visit its product page.
To Next Page
Loading...
