Antelope Audio Zen Quadro Synergy Core User Manual
Page 36
Settings Window
Click to choose an audio signal trim value for
the monitor outputs (14dBu - 20dBu). By
default, this option is set to 20dBu. Trim can
be used to compensate for the perceived
volume differences between two or more
sets of speakers so that they produce the
same perceived volume level.
Click to choose an audio signal trim value for
the line outputs (14dBu - 20dBu). By default,
this option is set to 20dBu.
Click to specify Panning Law compensation
between 0dB (none) to -4.5dB. When a
mono input feeds a stereo bus, the panning
law determines how you perceive the sound
level as the audio sweeps from one side of
To Next Page
Loading...
