AnyTone AT-D578UV Advanced Settings

COPYRIGHT BY CONNECT SYSTEMS INC. PERMISSION IS GRANTED TO DISTRIBUTE OR POST
1
SETTING THE AT-D578UV RADIO TO THE DESIRED MODE
When you get the AnyTone mobile radio it might be set to a band you don’t really
want. You might want to use it commercially with FCC Part 90 certification, so you
set it to Mode 0 or 1. If you want to be triband, then set it to mode 18. This lesson
will explain how to set it to the desired band.
AnyTone Defines the bands to be used as follows:
Mode Use
0 European Commercial
1 U.S. Commercial
3 European Amateur
4 Band 4
5 Band 5
7 U.S. Amateur
8 Commercial
10 Canada/Australia Amateur
13 Commercial
16 Thailand Amateur
17 Thailand Commercial
18 Band 19 (US Amateur Tri-band)

AnyTone AT-D578UV Specifications

General

Frequency Range	136-174 MHz, 400-480 MHz
Channels	4000
Zones	250
GPS	Yes
Bluetooth	Yes
CTCSS/DCS	Yes
APRS	Yes
Roaming	Yes
VOX	Yes
Supply voltage	13.8V DC ±15%
Waterproof	No
Power Output	50W/25W/10W/5W (VHF), 45W/25W/10W/5W (UHF)
Modes	DMR Tier I & II
Display	Color TFT
Bandwidth	12.5 kHz, 25 kHz