8
AT-D878U Digital DMR and Analog UHF Two Way Radio
3.4
Installing the Additional Speaker/Microphone (Optional)
Pry open the rubber MIC-Headset jack cover and then insert the Speaker /
Microphone plug into the double jack.
3.3
Installing / Removing the Belt Clip
a.
Installing the Belt Clip: Place the belt clip above the corresponding holes
on the back of the radio, and screw it into place clockwise with the two
supplied screws.
b.
Removing the Belt Clip: Unscrew counter-clockwise to remove the belt
clip.
3. PREPARATION
- Радиостанции Anytone в России -
To Next Page
Loading...
Need help?
General
