EasyManuals Logo

AnyTone DMR AT-D878U User Manual

AnyTone DMR AT-D878U
29 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #24 background imageLoading...
Page #24 background image
18
AT-D878U Digital DMR and Analog UHF Two Way Radio
Problems Solutions
The radio cannot be switched
on or no display after being
switched on.
A. Battery pack may not be installed
properly. Remove the battery pack
and install it again.
B. Battery power may be insufcient.
Recharge or replace the battery
pack.
The battery doesn't last very
long after charging.
The battery is defective; please replace it
with a new battery pack.
Cannot talk to or hear other
members in your group.
Other voices from
non-group members are heard
on the channel.
Analog: Change the CTCSS/DCS
Tone, and make sure to change the tone
on all radios in your group.
1. Make sure the frequency and
CTCSS are the same as other
members.
2. Make sure you are within range,
and not too far away from your
member.
3. Make sure you are set in correct
digital mode, and frequency.
4. In digital mode, make sure set
correct code and encrypt group is
used in current channel.
5. n digital mode, make sure set
correct receiving contacts and
receiving group is used.
8. TROUBLE SHOOTING GUIDE
- Радиостанции Anytone в России -
www.anyradio.ru

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AnyTone DMR AT-D878U and is the answer not in the manual?

AnyTone DMR AT-D878U Specifications

General IconGeneral
BrandAnyTone
ModelDMR AT-D878U
CategoryRadio
LanguageEnglish

Related product manuals