14
AT-D878U Digital DMR and Analog UHF Two Way Radio
6. PROGRAMMABLE FUNCTIONS
(8)
Emergency Alarm
Press the programmed key to start or exit the emergency alarm.
Emergency alarm should be set up in CPS-Public-Alarm Setting rst.
(9)
Record Switch
Enable/disable the recording function.
The radio is with standard 30hours recording for RX/TX communication in
digital mode.
Also it has optional 500hours or 1000hours digital/analog recording, please
contact with your dealers for the options..
(10)
Monitor
Monitor the weak signal or the signal with unmatched ID.
If you use this function in analog channel, the radio will emit the
background noise.
(11)
Send Alarm
In digital channel, press the programmed “Send Alarm” key, the radio will
pronounce “alarm” and the number , repeat press the key, the number will
change between 1-5. Press PTT key to send out the selected alarm in
current channel.
This function is only valid in digital channel.
(11)
Send Alarm
In digital channel, press the programmed “Send Alarm” key, the radio will
pronounce “alarm” and the number , repeat press the key, the number will
change between 1-5. Press PTT key to send out the selected alarm in
current channel.
(12)
Hot Key 1-6
Press the programmed hot key to activate the assigned function.
Hot key should be set up in CPS-Public-Hot key rst.
(13)
Work Alone
Turn on/off the work alone function. When work alone function is turned on,
the radio will start alarm when the response time is reached. Press any key
or voice transmit will shut off the alarm.
Work Alone function should be set in CPS-Public-Alarm setting rst.
(14)
Phrase Record
In digital channel, press the programmed “phrase record” key, the radio will
pronounce “record” and the number, repeat press the key, the number will
change between 1-25.
- Радиостанции Anytone в России -
To Next Page
Loading...
Need help?
General
