***REMOVE CARD***
INSERT CARD
CHIP CARD NOT SUPPORTED
Additional Screens you may see for Chip Card Processing
Displayed if card needs to be removed.
The terminal needs to process the Transaction as a
Chip Transaction. Please insert the Chip Card into
the Chip Card Reader at the bottom of the terminal.
Displays when there are no applications on the
chip supported by the terminal. If magnetic stripe
fallback is supported, the terminal will prompt to
swipe the card.
Remove the card from the Chip Card Reader and
use the Magnetic Stripe Card Reader instead.
<NAME> represents the card scheme. VISA
CREDIT, MASTERCARD or AMEX are the different
applications that a Transaction may use.
The cardholder presses ENTER to confirm
application selection.
SWIPE CARD
APPLICATION <NAME>
USE APPLICATION?
<NAME>
ENTER=YES CLR=NO
To Next Page
Loading...
