-57-
Chapter 12 About the Battery and Power
This product uses a built-in 4800mAh polymer lithium battery to charge the battery.
When the product operates individually, power is fed from the lithium battery. When
the provided charger is inserted, the charger is powered automatically via the charger.
When you charge this product for the first time, it is recommended to shutdown
the product and continuously charge it for more than 8 hours for optimal battery use.
For the use of a new product, it should be fully charged and discharged for the
first three times to activate it.
If charging is performed when the product is turned on, it takes a longer time to
charge.
Charging time: It typically takes about 7 hours to charge. The actual time depends
on the remaining battery level.
It is recommended to fully charge and discharge the product once every 3 months
to maintain the lithium battery.
Do not plug the charger into the electric outlet when the product is not connected.
When it will not be used for an extended period of time, fully charge the battery. It
should be charged and discharged every three months.
When the battery is too hot, the charging protection circuit will automatically close
the charging circuit to protect the lithium battery.
When the battery is low, charge it first. When it is running out of power, charge the
machine using the charger and connect it to PC. Charge it if:
A. The battery charging icon indicates that battery is exhausted.
B. The system automatically shuts down. It also shuts down quickly after reboot.
C. After you press buttons, there is no response.
To Next Page
Loading...
Need help?
General
