-60-
Make sure that the computer is properly connected to the product
Make sure that the storage space is not full
Make sure that the USB cable is not damaged
·
Connect to Wi-Fi but cannot surf the Internet
Make sure that there is wireless network nearby.
If static IP addresses are needed, make to enter a valid IP address. If dynamic IP
addresses are used,
static IP addresses should be disabled while the network is connected.
· Touch the keyboard on the touch screen and the response is not the expected /
desired result.
Perform touch screen calibration
For better performance, use a pen or your fingernail
· Cannot be connected to computer
Make sure the product is turned on
Make sure the product is not in sleep mode
Make sure to use the proper USB cable
To Next Page
Loading...
