26
2) If the camera’s exposure compensation is set to 1/2-stop increments,
ash exposure compensation will be up to ±stops in 1/2-stop increments.
2. FEB
With FEB (Flash Exposure Bracketing) function, you can take three shots
while automatically changing the ash output. The settable range is up to ±3
stops in 1/3-stop increments.
2.1 Press function button 4 until is displayed.
2.2 Press function button 3 corresponding to
, is displayed
and the FEB level display is highlighted.
2.3 Set the FEB level: turn<
> to set FEB level and press < > button.
2.4 ”0.3”indicates 1/3 stops, and”0.7”indicates 2/3 stops.
2.5 When used together with ash exposure, FEB shooting is performed
based on the ash exposure compensation amount.
To Next Page
Loading...
