54
1.
USE AND SAFEKEEPING OF THE MANUAL
All reproduction rights of this manual are reserved. Reproduction, even in part, is forbidden
without written authorization from EUROPA S.r.l.
In compiling this document the directions contained in the following documents were used:
Machine directive 2006/42/EC of 17 May 2006.
EMC Directive 2004/108/EC of 15 December
2004
Low Voltage Directive 2006/95/EC of 12 December 2006
UNI EN ISO 12100-1
st
:2005
UNI EN ISO 12100-2
nd
:2005
IMPORTANCE OF MANUAL
It is an integral part of the supply of the oven.
It is an essential tool in the use, treatment and maintenance of the oven.
It must be kept in good condition for the life of the oven and should only be disposed of after final
disposal of the oven itself
It must be updated whenever documentation for updating the oven is sent.
It must be given to the purchaser of the oven if the oven is sold to another user.
The wiring diagrams and control panel instructions are attached to the manual (separate manuals).
THE MANUAL IS MADE FOR
Transporters.
Assembly technician for assembling the machine (company authorized technician).
Installation technician for connection of the machine to auxiliary services (water, electricity, product
removal, waste water drainage, etc.).
Operational testing technician and personnel trainer
Operating technicians
Maintenance technician
Final disposal technician.
INSTRUCTIONS CONTAINED IN THE MANUAL
General safety precautions.
Description and technical data.
Intended and unintended use
Handling and transport of parts, assembly and dismantling.
Preparation of location in which the oven is to be installed.
Installation and connection of auxiliary services.
Machine testing and training of operating personnel.
Use
Maintenance and/or repair service
How to order spare parts.
Final disposal.
The operator must verify the suitability of the oven installation site in accordance with the
regulations provided by the national and local legal systems. In order to verify this, call a specialized
technician or the trade association.
The manual must be kept until the oven disposal. In the case the manual is lost or damaged, a new manual
may be required from the manufacturing company or the importer.
This manual must be kept near the machine, in a safe and known place for the operators – and only for them
- to find. It must be handled with care and must not be damaged; it is forbidden to remove, re-write or modify
the pages and their contents.
The manual reflects the state of the art technology at the time the oven is placed on the market and cannot
be considered inadequate simply because it is later updated on the basis of new experience.
The manufacturer reserves the right to update products and the relevant manuals without the
obligation to update preceding products and manuals, unless in exceptional circumstances.
To Next Page
Loading...