Apach E Series - Setting Front and Ceiling Power; Setting Front Power Percentage; Setting Ceiling Power Percentage

EN
74
6
8
7
Setting baking time
Using Baking time (6) button (indicated by the icon ) place the cursor on the related setpoint and press
Enter; modify the value by using + and – buttons (99 minutes is the highest value that can be set).
To confirm the value press Enter and leave the setting.
Setting the Steam time (only for versions with optional steam generator)
With the Steam time (7) button, place the cursor and the related setpoint and press Enter. Modify the value
(7) by using + and – buttons (99 seconds is the highest value that can be set). To confirm the value press
Enter and leave the setting phase. In this modality, activating the baking cycle, steam will be automatically
injected for the set time.
Manual Steam activation (only for versions with steam generator)
Position the cursor on the icon (8) and, by pressing the Steam button, steam will be distributed manually.
In this case the Time Steam setpoint indicates the activation time of the Manual Steam (in seconds).
Unpressing the Steam button, steam will stop. This modality can be use at any time.