Apach E Series - Power Management and Programs; Power Management Modes (OFF, ECON, EXTRA); Setting and Storing Programs

To Next Page

To Previous Page

Setting programs

Using programs, it is possible to memorize specific set-points for temperature, percentages, baking times

and steam injection. The use of various programs is recommended when there are variable products.

Place the cursor onto the icon (12). Press Enter. With + and – buttons select the desired program (max.

30 programs).

Set the parameters as indicated above (see paragraphs from 3.1 to 3.6). To store the program to memory

press Enter and leave the setting phase or repeat the procedure for another program.

The ”Program” setpoint cannot be modified if the instrument has a running baking cycle.