96
14.3.
LUBRICATION PROGRAMME
EVERY MONTH: lubricate the visible parts of the door hinge with oil spay.
14.4.
HOW TO ORDER SPARE PARTS
To order spare parts give the following information:
Oven model
Oven type
The serial number
Year of manufacture
14.5.
TROUBLESHOOTING (PROBLEMS THAT MAY BE ENCOUNTERED)
Nothing illuminates on the
control panel (2)
Fuse of external line blown
glass fuse of the board
Replace with similar one
Continuous leakage of
water from the steam
generator.
Dirty or faulty electrovalve
Heat elements do not heat
Faulty components in the control
circuit.
Replace the deteriorated parts
Little water (time-pressure)
Formation of limescale on
elements and ducts of the spray
nozzles.
Increase pressure and steam
time.
Decrease the number of steam
injections
Clean ducts and remove limescale
The chamber lighting does
not come on (2).
Blown light bulb
Defective components or
connections
Replace with a similar halogen
one
Check the components and
replace them if needed
(2) See wiring diagram
15.
OVEN STORAGE
If the oven is inactive, the following precautions should be taken.
If the oven has never been used, no precautions are necessary, except that it should be stored in a dry
place.
15.1.
TEMPORARY STORAGE
Clean the oven thoroughly, including the baking
chamber Empty the water pipes
15.2.
EXTENDED STORAGE
Clean the baking oven thoroughly
Empty the water pipes
Close the drain outlets to prevent foreign bodies from entering
Store the oven in a dry place, cover it with sheets to avoid the accumulation of dust and dirt and
leave the door half close
15.3.
TRANSFER
In case of sale, the purchaser has the right to be informed about any repairs that have been made to the
oven and to be instructed on its use and maintenance; the purchaser should be given all the documentation
together with the declaration of conformity.
To Next Page
Loading...