EasyManua.ls Logo

Apogee ONE - Connecting a Home Stereo; Connecting a Microphone

Apogee ONE
38 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Apogee ONE | User’s Guide for Windows
When powering ONE from two AA batteries, it is highly recommended to use NiMH rechargeable
batteries for the best battery life when recording and playing back audio. Approximate battery life is
shown below for minimal and maximum load conditions when using standard and rechargeable NiMH
batteries.
Standard AA
Rechargeable NiMH AA
Playback from iTunes
2 hours, 40 minutes
(See note below)
3 hours, 40 minutes
Recording - max load
30 minutes
2 hours, 10 minutes
About 5-10 minutes before ONE, the level meters’ red LEDs will flash to warn of the approaching loss
of power under most conditions.
After changing batteries, it is necessary to power cycle ONE by removing and then re-inserting the
USB connector.
Note - Max Load condition is as follows:
Input 1 set to Ext 48v Mic with a 10mA phantom power load.
Input 2 accepts a 1kHz tone at -1dBfs
Output set to maximum.
Unit is set to 96kHz sample rate.
Page 9

Other manuals for Apogee ONE

Related product manuals