Apogee ONE - Apogee Control Panel (Logic Pro 8, GarageBand)

Apogee ONE | User’s Guide for Windows
1. Open Apogee Maestro software (found
in your Start Menu).
2. Select the Analog Level setting that corresponds to the microphone
source you’d like to record.
● For example, if you have a microphone connected to the XLR
connection on the breakout cable, select Ext Mic  from the Analog
Level menu on channel 1.
● If you would like to utilize the built-in microphone, select Int Mic.
● Channel 2’s source is always the 1/4” Instrument input.
Note: If you are using a condenser microphone that requires phantom power, select Ext Mic 48V.
Phantom power is indicated on the display by a red dot above the microphone icon.
Page 14