Apollo XP95 Installation Guide

13
12.Check the interface to see if the HI and LO LEDs have extinguished.
If they have not, the alignment procedure has to be repeated.
13.Set segment 8 of the DIL switch on the interface to normal opera-
tion.
64
No
Op
de
www.acornfiresecurity.com
www.acornfiresecurity.com

Apollo XP95 Specifications

General

Color	White
Operating Voltage	17V to 28V DC
Humidity	0% to 95% RH (non-condensing)
Type	Optical Smoke Detector
Protocol	XP95 (Apollo Protocol)
Certification	EN54