Applied Precision WS 2120 - Page 70

Working Standard
User’s Guide
WS-UGFW619-EN www.appliedp.com
70
Meter Parameters shown in Add / Edit Meter screens:
SN
- serial number
- delta to star conversion
Type
- meter type
Frequency
- Frequency from meter’s label
Connection
- connection type
Method
- method of registering bidirectional
energy flow (Algo0-Algo4)
Input type
- mark type
PROTOCOL TEXTS
Energy
- energy type
Current *
- current protocol text
Constant
- constant
Voltage *
- voltage protocol text
Constant unit
- constant unit
Customer
- customer identification
Constant type
- primary or secondary for indirect meters
Area
- area
Producer
- manufacturer
Location
- Location
Class
- accuracy class
Address
- Address
Year
- year of manufacture
Note x
- universal note (4x)
CT-ratio
CT-Snom
- given CT ratio
- CT nominal burden
VT-ratio
VT-Snom
- given VT ratio
- VT nominal burden
SECONDARY / PRIMARY
Imin
- minimal current from meter’s label
Inom
- nominal current from meter’s label
Imax
- maximal current from meter’s label
Unom
- nominal voltage
* Parameters with automatic recalculation / change when corresponding primary and secondary parameters are
defined or changed