10
Overview
Installation requirements
(*1): Derated use at 35ºC-40ºC
(*2): Below 2000 m for 3C certification
Environment Operation Storage
Ambient temperature 0ºC-40ºC (*1) -10ºC-60ºC
Humidity 10%-90% RH (non-condensing) 10%-90% RH (non-condensing)
Altitude 0-3000 m (*2) 0-3000 m
The Appotronics engineering projector adopts the nominal single-phase power supply (with dedicated
grounding PE).
Do not underestimate the weight of this projector. The projector weighs about 16kg. Ensure that the base or
hoisting frame used to install the projector can withstand five times the entire load of the system.
This projector comes with a power cable used to connect to the projector and the power supply.
Projector Power Supply Requirements
AL-FX550
AL-FH550
AL-FU550
AL-FW550
AL-FX650
AL-FH650
AL-FU650
AL-FX750
AL-FH750
AL-FU750
AC 100-240V,6A-3A,50/60Hz
The following table describes the physical environment for safe operation or storage of the AL-FX550/
FW550/FU550/FH550/FX650/FH650/FU650/FX750/FH750/FU750 projector.
Environment conditions
Main power requirements
Projector weight
To Next Page
Loading...
