9
Repair: Only trained and qualified service technicians (understand laser safety, UV radiation, high voltage and
connected circuits that create all the potential hazards) can open the projector for repair.
Disclaimer: Appotronics Corporation has endeavored to ensure the accuracy and reliability of the information
provided in this document. However, as the product continues to improve, the information in this document
is subject to change without notice. Appotronics Corporation is not responsible for omissions or inaccurate
information. The updated version of this document is issued on a regular basis as needed. Please contact
Appotronics Corporation to obtain the latest version.
Overview
About This Manual
Safety Warnings and Guides
Labels and Tags
Observe and follow all warnings and instructions marked on the projector.
General Warning Information
Indicates a dangerous condition that, if not avoided, will result in death or serious injury.
This signal word is limited to the most extreme case.
Indicates a dangerous condition that, if not avoided, could result in death or serious injury.
Failure to observe the following safety instructions may cause damage to eyes and skin.
Never look directly at the projector lens or laser output. Extreme-high brightness may
cause permanent eye damage. To avoid UV radiation, keep the housing complete when
working with the projector. Use protective safety equipment and wear goggles during
maintenance.
When the laser is on, do not open the protective enclosure.
Reflective objects in the laser beam are not allowed.
Indicates a risk condition that, if not avoided, may result in minor or moderate injury.
Caution! is used to indicate a situation that is not related to personal injury.
Warning
Warning
Warning
Warning
Caution
Warning
Danger
To Next Page
Loading...
