35
Maintenance and Repair Services
The projector needs to be maintained. You need to regularly clean the lens.
Do not disassemble any parts of the projector. To replace the parts, please contact the dealer.
You can clean the lens when you find that the lens surface is stained or dusty.
Use a compressed air tank to remove dust.
If there is dust or stain, gently wipe the lens surface using the lens paper or damp cloth with some
cleaning agent.
To remove dirt or dust, wipe the enclosure with a soft, lint-free cloth.
To remove strong dirt or spots, wet the soft cloth using water and neutral pH detergent, and then wipe the
enclosure.
If you need to store the projector for a long period of time, follow the instructions below:
Ensure that the temperature and humidity of the storage area are within the recommended range for the
projector.
Retract the adjustment feet.
Remove the battery from the remote control.
Use the projector's original packaging or equivalent material to package the projector.
It is recommended to use the original packaging or equivalent material when transporting the projector.
- Do not rub the lens with abrasive materials.
- Do not use wax, alcohol, benzene, thinner, or other chemical cleaners because these substances can
damage the enclosure.
Projector Maintenance
Cleaning the Lens
Cleaning the Projector Enclosure
Storing the Projector
Transporting the Projector
Caution
Caution
To Next Page
Loading...
