APsytems ECU-3 V8.0 Installation/User Manual 12 12
ECU INITIALIZATION SEQUENCE
Reporting Inverters:
The number of inverters reporting into the ECU. If the number is followed
by an “!”, then the number of reporting inverters does not match the
number of UIDs that have been programmed into the ECU (see Managing
Inverter UIDs pg. 22).
NOTE: The inverter UIDs MUST BE PROGRAMMED into the ECU for
the ECU to recognize the inverters. The ECU will NOT auto-sense the
inverters (see Managing Inverter UIDs pg.22).
To Next Page
Loading...