APsytems ECU-3 V8.0 Installation/User Manual 19 19
LOCAL NETWORK INTERFACE
Using an Apple Mac
1. Connect the computer to the ECU using a CAT5 network cable.
2. Power up the ECU by connecting the power cable.
3. Select the Apple icon in the menu bar to access “System
Preferences”.
4. Select “Network” in the “Internet & Wireless” section of the System
Preferences.
5. Select “Ethernet” on the left side of the Network window.
6. Select “Manually” from the “Congure IPv4” drop down menu.
7. Enter the following in the appropriate elds:
IP Address: 60.190.131.190
Subnet Mask: 255.0.0.0
8. Leave the “Router” eld blank.
9. Select “Apply”.
10. Using a standard web browser on your computer, enter the IP
Address that is displayed on your ECU in to the URL search eld.
Figure 21
To Next Page
Loading...