APsytems ECU-3 V8.0 Installation/User Manual 25 25
LOCAL NETWORK INTERFACE
CHANGING THE DATE, TIME ZONE
It is critical for accurate power production reporting that the ECU is
programmed with the correct date, time, and time zone.
1. Select “Administration” tab at the top of the page.
2. Select “Date, Time, Timezone” tab.
The Date, Time, Time Zone page is displayed.
3. Select the “Date Time” eld.
The Date, Time page is displayed.
NOTE: Date is displayed in “international date format” – YYYY/MM/DD.
Figure 26
Date, Time, Time Zone Tab
Date Time Field
Time Zone Field
Figure 27
Figure 28
To Next Page
Loading...