APsystems ECU-3 - Table of Contents

TABLE OF CONTENTS
INTRODUCTION 3
HARDWARE INSTALLATION 5
Preparation
Selecting an Installation Location for the ECU
Using Electrical Mounting Din Rail
Using Wall Mount 6
Cable Ports 7
Cable Connections
Internet Connection 8
Direct CAT5 Connection
Wireless Connection
Power Up ECU 9
ECU INITIALIZATION SEQUENCE 10
USING THE ECU MENU BUTTON 13
RESETTING THE ECU TO FACTORY DEFAULTS 15
TROUBLESHOOTING ECU OPERATION 16
LOCAL NETWORK INTERFACE 17
Connecting to the ECU via the LAN 18
Connecting Directly to the ECU
Using a Windows-based PC
Using an Apple Mac 19
Viewing the ECU’s Home Page 20
Managing Inverter UIDs 22
Initial Programming of the ECU with the Inverter UIDs
If Manually Entering the UIDs into the ECU 23
If Using a Scanning Gun to Enter the UIDs into the ECU
Adding Additional Inverter UIDs 25
Deleting an Existing Inverter UID
Changing the Date, Time Zone 25
Changing the ECU Language 27
Managing the Network Connection 28
Assigning a Static IP Address to the ECU
Managing The Wlan/Wifi Connection 30
To Change the ECU to WLAN Mode
REMOTE ECU MANAGEMENT 34
ECU Configuration 36
Setting the ECU Time Zone 37
Managing Inverter UIDs and Updating the Inverter UID List 38
TECHNICAL DATA 41
APsystems ECU-3 V7.0 Installation/User Manual