APsystems ECU-3 - Local Network Interface; Connecting to the ECU Via the LAN

APsytems ECU-3 V8.0 Installation/User Manual 17 17
LOCAL NETWORK INTERFACE
Figure 19
The ECU can be congured, by connecting a computer to the ECU via the
Local Area Network (LAN), or by connecting directly to the ECU via its
Ethernet port.
CONNECTING TO THE ECU VIA THE LAN
1. Make sure both your computer and the ECU are correctly
connected by the LAN.
2. Using a standard web browser on your computer, enter the IP
Address that is displayed on your ECU in to the URL search eld.
The ECU’s Home Page is displayed.